Doodlemoth

← All patterns

Adderback

IntermediateEdge-huggingLinesStrokes: line
Example of Adderback
Drawn fresh in your browser each time.
Fill in

You need a fine black pen, a pencil and a small square of paper.

Red shows what each step adds. Black is already on the paper.

  1. Step 1: the new strokes are redJust inside the edge of the section, draw a line that copies the edge all the way round, then another a little further in, so you have a narrow band. Keep adding lines the same distance apart, all the way round each time, until there is no room left for a whole band.
  2. Step 2: the new strokes are redIn the first band, draw a zigzag that touches one side and then the other, all the way along. Draw a second zigzag that touches the opposite sides, crossing the first in the middle, so the band becomes a chain of diamonds with triangles along both sides. Where the two zigzags cross, lift the pen so one passes under the other, taking turns.
  3. Step 3: the new strokes are redRepeat the chain in every band. Where a band swings round a corner and a side triangle grows large, draw a smaller triangle inside it and fill that black. Where the innermost lines from opposite sides run close together, lay one last chain down the middle between them, its points touching both lines, so the two sides join. Finish every small space still left, including the very middle, the same way as the corners: draw a smaller copy of it inside and fill that black.
  4. Step 4: the new strokes are redPut one small black dot in the middle of every diamond.
  5. Optional: fill inFill every other diamond solid black.

Fitting it to the spaceLet the pattern take its cue from the nearest edge. Don't rule or measure; eyeballed spacing looks better.

Want to use it on a full tile? Get today's recipe.